三峡库区滑坡的时空分布特征与成因探讨

三峡库区地质灾害频繁发生,地质历史上大型滑坡广泛发育。近年库区滑坡灾害有逐年增加趋势。这些滑坡形成的堆积体成因复杂,不能单纯从传统的外动力或内动力作用来解释,给库区灾害的防治工程带来了很大困难。三峡库区大型古滑坡主要沿长江干流和支流的深切河谷两岸分布,与河流发育演化史密切相关。15万年以来,长江三峡地区经历了新构造期以来抬升速率最快的一次构造幕,山原期夷平面上升了100m,河流强烈下切,形成高陡岸坡,卸荷效应显著;同时,该时期三峡地区的气候受到青藏高原环境变化的影响,在间冰期可能存在相似的暖湿古气候环境,降水极为丰富。三峡库区的大型古滑坡在新构造快速抬升时期广泛发育,并且与暖湿多雨期相对应,表明库区滑坡的发育演化是新构造运动和气候变化内外动力耦合作用的结果。     

Influence of molar mass distribution and long-chain branching on strain hardening of low density polyethylene

Low-density polyethylenes (LDPE) were synthesized in a laboratory-scale autoclave under high pressure. These samples were found to possess a high molar mass tail, resulting in a distinctly bimodal molar mass distribution and a lower concentration of long-chain branching than typical of commercial LDPEs. Rheological experiments in elongation showed that these samples exhibit a very pronounced strain hardening, which could be favorable for distinct processing operations. Although the samples have a rather high molar mass ( g/mol), their zero shear-rate viscosities η ₀ and their shear thinning behavior are still in a range, where thermoplastic processing is possible. A qualitative understanding of the experimental results is tried by the model of the Cayley tree.

Numerical path integration of a non-homogeneous Markov process

The numerical path integration method, based on Gauss-Legendre integration scheme, is applied to a Duffing oscillator subject to both sinusoidal and white noise excitations. The response of the system is a Markov process with one of the drift coefficients being periodic. It is a non-homogeneous Markov process that does not have a stationary probability distribution. When applying the numerical procedure, the values of transition probability density at the Gaussian-Legendre quadrature points need only be calculated for time steps of the first period of the sinusoidal excitation, and they can be saved for use in all subsequent periods. The numerical procedure is capable of capturing the evolution of the probability density from an initial distribution to one that is changing and rotating periodically in the phase space.     

Adiabatic shear band localization of inelastic single crystals in symmetric double-slip process

Summary The main objective of the present paper is the development of a viscoplastic regularization procedure valid for an adiabatic dynamic process for multi-slips of single crystals. The next objective is to focus attention on the investigation of instability criteria, and particularly on shear band localization conditions.To achieve this aim, an analysis of acceleration waves is given, and advantage is taken of the notion of the instantaneous adiabatic acoustic tensor. If zero is an eigenvalue of the acoustic tensor, then the associated discontinuity does not propagate, and one speaks of a stationary discontinuity. This situation is referred to as the strain localization condition, and corresponds to a loss of hyperbolicity of the dynamical equations. It has been proved that for an, adiabatic process of rate-dependent (elastic-viscoplastic) crystal, the wave speed of discontinuity surface always remains real and different from zero. It means that for this case the initial-value problem is well-posed. However, for an adiabatic process of rate-independent(elastic-plastic) crystal, the wave speed of discontinuity surface can be equal zero. Then the necessary condition for a localized plastic deformation along the shear band to be formed is as follows: the determinant of the instantaneous adiabatic acoustic tensor is equal to zero. This condition for localization is equivalent to that obtained by using the standard bifurcation method. Based on this idea, the conditions for adiabatic shear band localization of plastic deformation have been investigated for single crystals. Particular attention has been focused on the discussion of the influence of thermal expansion, thermal plastic, softening and spatial covariance effects on shear band localization criteria for a planar model of an f.c.c. crystal undergoing symmetric primary-conjugate double slip. The results obtained have been compared with available experimental observations.Finally, it is noteworthy that the viscoplasticity regularization procedure can be used in the developing of an unconditionally stable numerical integration algorithm for simulation of adiabatic inelastic flow processes in ductile single crystals, cf. [21].The paper has been prepared within research programme sponsored by the Committee of Scientific Research under Grant 3 P404 031 07.     

连铸结晶器内部流场及熔渣卷入的数值模拟

针对连铸结晶器内部流场及熔渣卷入过程 ,提出了两方程k -ε湍流模型和充填法数值计算模型 ,并采用硅油 /水模拟体系代替熔渣 /钢液体系 ,进行了模拟试验和数值计算。对充气造成的浸入式水口水流脉动的影响进行分析。计算结果与试验结果符合良好 ,表明本文所采用的数值模拟方法是适用的     

作动器参数对结构性能的影响和调整受力状态的实施策略模拟

基于规划法研究了作动器各参数对自适应超静定桁架性能的影响。该规划法能够使结构工作状态更合理化。这一方法能够改善自适应结构的工作状态因而提高承载能力。以此为基础，研究了具有作动器的组合杆的有关参数诸如变形上限、刚度和承载力上限对于控制效果的影响。从而为作动器的合理选择提供了理论根据。对于调整作动器变形以控制结构强度的实施策略进行了模拟和分析。该策略包括3部分：1．模拟和分析了“加载、调控、卸载”重复循环直至调控的完成；2．不同作动器按比例同时放大变形直到调控实现；3．多次加载、调控同一次加载、调控结构的等价性。研究表明本文提出的使结构工作状态合理化的调控过程是安全、可靠和灵活的。     

Order and Pattern Formation in Psychotherapy

In an empirical analysis of the dynamics of psychotherapy processes, concepts and tools from self-organization theory are applied. Our focus is on pattern formation in the therapy system, i.e. the system constituted by the interaction dynamics of therapist and patient. The hypothesis of pattern formation explored is based on data sets of 28 psychotherapy courses (10 behavioral, 3 client-centered, 9 heuristic, 6 schema-oriented; 40 to 90 weekly sessions). Patients' and therapists' therapy session records are analyzed (33 variables addressing various aspects of the therapeutic relationship, of progress within and outside the therapy setting). Multivariate methods are implemented to test the key hypothesis of self-organization theory, namely the reduction of degrees of freedom of a system. Consistent with this hypothesis, a significant reduction of degrees of freedom is found when the initial and final sessions of the therapies are compared. Correspondingly, Landsberg order increased significantly in the course of therapies. Given these findings, the explorative question of how this self-organizing property relates to therapy outcome is investigated. We find a significant positive association with various outcome measures, such as: therapist's and client's evaluations of success (direct change measures), feelings of guilt, anxiety, social potence, depression (pre-post effect sizes), and others. These results suggest that order is related to therapy outcome. In our interpretation, order is a dynamical attribute of the therapeutic alliance to be considered as a promising therapy process variable.     

单轴条件下砂岩三维破裂过程的CT观测

岩石破裂过程研究一直是岩石力学专家关注的重要问题。本文采用特制的三轴压力仪与医用西门子SOMATOM -plusCT扫描仪结合 ,对砂岩进行了室内单轴压缩试验。通过对砂岩的CT图像和密度损伤增量与应力关系曲线分析 ,结果显示 ,砂岩的破裂演化过程可分为初始损伤的压密、裂纹出现—扩展、裂纹归并—分岔、裂纹重分岔—扩展以及裂纹惯通—宏观破坏等五个阶段。在初始损伤的压密阶段 ,砂岩的密度损伤增量为正值 ,速率也为正 ;在裂纹出现—扩展阶段 ,砂岩出现局部密度损伤增量减小 ,并随应力增加而由正值转为负值 ,速率也由正变负 ;在裂纹归并—分岔阶段 ,砂岩的密度损伤增量全为负值 ,速率也变快 ;在裂纹重分岔—扩展阶段 ,砂岩的密度损伤增量继续变负 ,但速率变慢 ;在裂纹惯通—宏观破坏阶段 ,砂岩的密度损伤增量继续变负 ,速率变的更快。     

砖砌烟囱爆破拆除倾倒过程的观测分析

本文通过对砖砌烟囱爆破拆除的实例分析得到,在砖砌烟囱的爆破拆除倾倒过程中,其倾倒支点是不断移动的,随着烟囱主体的不断下沉,相对于未垮部分的烟囱主体来说,该支点沿烟囱筒体不断向上移动。这表明,不能简单地按刚体模型描述砖砌烟囱的倾倒运动。     

Beitrag zur Prüfung metallischer Werkstoffe im Torsionsversuch

Zusammenfassung Der Torsionsversuch eignet sich zur Untersuchung des plastischen Verhaltens von Metallen bei erhöhten Temperaturen, wenn die Fließspannung stark von der Umformgeschwindigkeit abhängt. Aus der gemessenen Drehmoment-Drehwinkel-Kurve wird die Fließkurvek _f () berechnet. Hierfür wird ein Fließkriterium benötigt, dessen Unsicherheit im allgemeinen größer ist als alle Meßfehler. Diese Unsicherheit geht aber nicht in die berechnete Dehngeschwindigkeitsempfindlichkeit ein, die somit als Hauptergebnis des Versuches anzusehen ist.Um die Bedingungen technischer Warmumformung zu simulieren, wird die Verwendung extrem kurzer Proben (flacher Scheiben) empfohlen, womit sehr hohe Umformgeschwindigkeiten erreicht werden können. Für die Auswertung derartiger Versuche ist die wirksame Länge der kurzen Proben — experimentell oder semiempirisch — zu bestimmen und die Kerbwirkung zu berücksichtigen. Im Gegensatz zur herkömmlichen Vorgehensweise wird empfohlen, die örtliche Spannung und Verzerrung nicht für die Mantelfläche der Probe zu berechnen, sondern für einen kritischen Radialabstand im Innern der Probe, für den die Schiebung von der Kerbwirkung unabhängig ist, so daß sich die zuverlässigsten Werte ergeben.

---

Summary The torsion test is often used for studying the plastic deformation of metals at elevated temperatures when stress depends strongly on the strain rate. From the measured torque-twisting angle curve, the stress-strain curvek _f () has to be calculated. For this purpose a yield criterion has to be used the uncertaintly of which normally exceeds all experimental errors. This uncertaintly, however, does not propagate into the calculated strain rate sensitivity which therefore may be considered as the main result of the torsion test.For simulating the conditions of technical hot forming processes, the use of extremely short test pieces (flat discs) by which very high strain rates can be obtained is recommended. For evaluating the test data the efficient lenght of short specimens has to be determined. In opposition to the conventional procedure of test evaluation, it is recommended not to calculate stress and strain for the surface of the specimen but for a critical radius for which strain is independent of the notch effect so that the most reliable values are obtained.

Mit 5 Abbildungen